Canon G4010 error code 5B00 mean the waste ink counter overflow, you have to reset Canon G4010 Waste Ink Counter (clear Waste Counters). The printer will blink as follow: Orange light – 7 times. Alternatively Green (Power) and Orange.
And OS show up problem “SupportCode: 5B00” like this:
This problem means Canon G4010 printer Waste Ink Counter is overflowed and it must be reset
As more and more ink spills take place on your Canon G4010 printer’s ink cartridges, due to proper ink cartridge or continuous ink system installation, the 5B00 problem message could be more likely to appear on your Canon G4010 printer.
Solution for this problem is reset Canon G4010 printer by WIC Reset Utility tool.
New WIC Reset Utility supports Canon G4010 printer now. Please always use latest WIC Version!!
Download WIC Reset Utility – Download Canon G4010 resetter
Download the LATEST version of the WIC reset utility here:
For Windows OS – https://resetkey.net/tools/wicreset.zip
For MAC OS – https://resetkey.net/tools/iWIC.zip
Mirro link here: https://resetkey.net/download
To reset Canon G4010 5B00 Waste Ink Counter Error – You should be PUT PRINTER IN SERVICE MODE!
Then use WIC Reset Utility Tool with the Reset Key to reset your Canon G4010 printer. It takes less then 1 minute!
Read previous to reset Canon G4010 5B00 error:
If for some reason You can’t place Your Canon G4010 printer in SERVICE MODE – You will be NOT ABLE to perform RESET!
If You used Canon Service Tool such as ST V3400, V4200 etc… – The printer will never be able to enter Service Mode after that.
So the only option to solve the error is to replace and also reprogram EEPROM Chip on printers main board.
If You cant put printer in Service Mode – You dont need to pay for Reset Key – it will not work.
How to put Canon G4010 printer in service mode
Step 1: Turn off Canon G4010 printer
Step 2: Press and hold Canon G4010 printer’s RESET button
Step 3: Press and hold printer’s POWER button.
Step 4: Released printer’s RESET button, POWER still pressed
Step 5: Press and released Canon G4010 printer’s RESET button 5 times
Step 6: Released printer’s POWER button:
Now, Canon G4010 printer on SERVICE MODE condition. In this condition, computer detect found new hardware.
Step 7: When OS detect FOUND NEW HARDWARE, wait about 20 seconds and press CANCEL
How exactly to reset Canon G4010 printer 5B00 Waste materials Ink Counter error
After put Your Canon G4010 printer in SERVICE MODE, please follow this instruction to reset Canon G4010 printer.
Step 1: Download latest WIC Reset Utility tool with above link (or here).
Step 2: Buy Canon G4010 Waste Ink Counter Reset Key here: Buy WIC Reset Key – Only $8.99
Step 3: Run WIC Reset, click on “Clear Waste Counters” button, read the check list, if all good, click “Yes” to continue reset Canon G4010 Waste Counter:
Step 4: Enter the Canon G4010 reset key
You will receive a “Congratulations” message if everything ok.
Now check Canon G4010 printer status in Control Panel, If it shows “Printer is online“, your Canon G4010 printer is ready to print – no errors – no waste Counters Overflow.
You can watch video tutorial – How to PUT PRINTER IN SERVICE MODE and Reset Canon G4010 printer 5B00 error:
I hope this post helpful. Thanks