Canon G3110 problem code 5B00 mean the waste ink counter overflow, you should be reset Canon G3110 Waste Ink Counter (clear Waste Counters). The printer will blink as follow: Orange light – 7 times. Alternatively Green (Power) and Orange.
And OS appear problem “SupportCode: 5B00” like this:
This problem means Canon G3110 printer Waste Ink Counter is overflowed and it must be reset
As increasingly more ink spills take place on your Canon G3110 printer’s ink cartridges, due to proper ink cartridge and also continuous ink system installation, the 5B00 problem message could be more likely to appear on your own Canon G3110 printer.
Solution for this problem is reset Canon G3110 printer by WIC Reset Utility tool.
New WIC Reset Utility supports Canon G3110 printer now. Please always use latest WIC Version!!
Download WIC Reset Utility – Download Canon G3110 resetter
Download the LATEST version of the WIC reset utility here:
For Windows OS – https://resetkey.net/tools/wicreset.zip
For MAC OS – https://resetkey.net/tools/iWIC.zip
Mirro link here: https://resetkey.net/download
To reset Canon G3110 5B00 Waste Ink Counter Error – You have to PUT CANON PRINTER IN SERVICE MODE!
Then use WIC Reset Utility Tool with the Reset Key to reset your Canon G3110 printer. It takes less then 1 minute!
Read previous to reset Canon G3110 5B00 problem:
If for some reason You can’t put Your Canon G3110 printer in SERVICE MODE – You will be NOT ABLE to perform RESET!
If You used Canon Service Tool such as ST V3400, V4200 etc… – The printer will not be able to get in Service Mode from then on.
Therefore the only solution to resolve the issue is to change or reprogram EEPROM Chip on printers main board.
If You cant put printer in Service Mode – You dont need to pay for Reset Key – it will not work.
How to put Canon G3110 printer in service mode
Step 1: Turn off Canon G3110 printer
Step 2: Press and hold printer’s RESET button
Step 3: Press and hold printer’s POWER button.
Step 4: Released printer’s RESET button, POWER still pressed
Step 5: Press and released Canon G3110 printer’s RESET button 5 times
Step 6: Released printer’s POWER button:
Now, Canon G3110 printer on SERVICE MODE condition. In this condition, computer detect found new hardware.
Step 7: When OS detect FOUND NEW HARDWARE, wait about 20 seconds and press CANCEL
How to reset Canon G3110 printer 5B00 Waste Ink Counter error
After put Your Canon G3110 printer in SERVICE MODE, please follow this instruction to reset Canon G3110 printer.
Step 1: Download latest WIC Reset Utility tool with above link (or here).
Step 2: Buy Canon G3110 Waste Ink Counter Reset Key here: Buy WIC Reset Key – Only $8.99
Step 3: Run WIC Reset, click on “Clear Waste Counters” button, read the check list, if all good, click “Yes” to continue reset Canon G3110 Waste Counter:
Step 4: Enter the Canon G3110 reset key
You will receive a “Congratulations” message if everything ok.
Now check Canon G3110 printer status in Control Panel, If it shows “Printer is online“, your Canon G3110 printer is ready to print – no errors – no waste Counters Overflow.
You should watch video tutorial – How to PUT PRINTER IN SERVICE MODE and Reset Canon G3110 printer 5B00 error:
I hope this post useful. Thank you