Canon G2000 problem code 5B00 mean the waste ink counter overflow, you need to reset Canon G2000 Waste Ink Counter (clear Waste Counters). The printer will blink as follow: Orange light – 7 times. Alternatively Green (Power) and Orange.
And operating system show problem “SupportCode: 5B00” like this:
This error means Canon G2000 printer Waste Ink Counter is overflowed and it must be reset
As increasingly more ink spills take place on your Canon G2000 printer’s ink cartridges, due to proper ink cartridge and also continuous ink system installation, the 5B00 error message could be more likely to appear on your own Canon G2000 printer.
Solution for this problem is reset Canon G2000 printer by WIC Reset Utility tool.
New WIC Reset Utility supports Canon G2000 printer now. Please always use latest WIC Version!!
Download WIC Reset Utility – Download Canon G2000 resetter
Download the LATEST version of the WIC reset utility here:
For Windows OS – http://resetkey.net/tools/wicreset.zip
For MAC OS – http://resetkey.net/tools/iWIC.zip
Mirro link here: http://resetkey.net/download
To reset Canon G2000 5B00 Waste Ink Counter Error – You need to PUT CANON PRINTER IN SERVICE MODE!
Then use WIC Reset Utility Tool with the Reset Key to reset your Canon G2000 printer. It takes less then 1 minute!
Read previous to reset Canon G2000 5B00 problem:
If for reasons uknown You can’t place Your Canon G2000 printer in SERVICE MODE – You will be NOT ABLE to perform RESET!
If You used Canon Service Tool such as ST V3400, V4200 etc… – The printer will not be able to enter Service Mode from then on.
Therefore the only way to fix the issue is to replace or reprogram EEPROM Chip on printers main board.
If You cant put printer in Service Mode – You dont should be pay for Reset Key – it will not work.
How to put Canon G2000 printer in service mode
Step 1: Turn off Canon G2000 printer
Step 2: Press and hold Canon G2000 printer’s RESET button
Step 3: Press and hold printer’s POWER button.
Step 4: Released Canon G2000 printer’s RESET button, POWER still pressed
Step 5: Press and released Canon G2000 printer’s RESET button 5 times
Step 6: Released Canon G2000 printer’s POWER button:
Now, Canon G2000 printer on SERVICE MODE condition. In this condition, computer detect found new hardware.
Step 7: When operating system detect FOUND NEW HARDWARE, wait about 20 seconds and press CANCEL
How exactly to reset Canon G2000 printer 5B00 Waste Ink Counter error
After put Your Canon G2000 printer in SERVICE MODE, please follow this instruction to reset Canon G2000 printer.
Step 1: Download latest WIC Reset Utility tool with above link (or here).
Step 2: Buy Canon G2000 Waste Ink Counter Reset Key here: Buy WIC Reset Key – Only $8.99
Step 3: Run WIC Reset, click on “Clear Waste Counters” button, read the check list, if all good, click “Yes” to continue reset Canon G2000 Waste Counter:
Step 4: Enter the Canon G2000 reset key
You will receive a “Congratulations” message if everything ok.
Now check Canon G2000 printer status in Control Panel, If it shows “Printer is online“, your Canon G2000 printer is ready to print – no errors – no waste Counters Overflow.
You should watch clip tutorial – How to PUT PRINTER IN SERVICE MODE and Reset Canon G2000 printer 5B00 problem:
I hope this article useful. Have a nice day!