Here is tips to solve the E-01 Error on Epson printer LCD
Have you ever seen this error code on the LCD before? And you asked how you could fix this easily and quickly. Today we will show you how to do that.
What is E-01 Error Code and how to fix it?
Firstly, we will help you understand what E-01 Error Code is.
The E-01 Error Code is the same as Fatal Error that occurred in the Epson Service Manual. That means the printer can’t end tests itself. Sometimes, you start you printer and check something you need but it can’t do because of some reasons you couldn’t know then the printer send you error message. So what you need now is fixing – How to do that. The faster the selftest done, the better the printer can be used.
Instructions for this problem (E-01 error):
+ Shut your printer down then unplug the power cable foe 5 minutes. Turn it on again if the error is continuously appearing, let’s move to the step 2.
+ You have to know exactly that the transportation look has been deleted. Keep the transportation lock as displayed below:
+ In case the CD tray is in the eject position, put the CD tray button to draw back the tray to the shortage position. Don’t forget that you shouldn’t push or pull the CD tray into position.
Turn off the Epson Printer
+ In case your printer contains CISS, let’s watch out to make the printer carriage can turn left or right easily.
+ You have to check the upper scanner to make it close completely.
+ That initialization routine that gets run on Start Up checks the entire units function before completing without an error.
+ As we mentioned the carriage in the printer using CISS can be prevented from moving left or right so you have to use Epson ink cartridges and run the printer. If the CISS is installed wrong, there will be not any error.
+ Connect the cartridge loading area during turning-off process then change the carriage position, just an ink needed. Lifting slightly, it can be moved easily, if there are any errors such as slow appearance, please clean it.
+ The paper path is opposite the size adjustment slide on the paper tray, a small opto-sensor can be blocked by dust. The best instruction for this is tidying up all optical sensors, paper feed sensors, encoder strip and disc encoder.
+ That is all today to help you fix the error code on Epson printer LCD. Please look forward to reading more soon. Thank you!