You are using the Epson Stylus NX625 printer series and you have the issue with the Waste Ink, Epson Stylus NX625 printer uses the Waste Ink Counter to prevent the waste ink from overflowing, the Waste Ink Counter will be full of ink after you print a large of documents, this limit raise up from 0% to 100%, when the Waste Ink Counter is equally 100% or more, the printer will stop working instantly to sure that the waste ink isn’t able to overflow into the Waste Ink Tray. The signals for this position are the twice red light flashing and send the notification “The Printer’s Ink Pads are at the end of Their service life. Please contact Epson Support”.
For the new Epson printer series, they install the Waste Ink Counter on 100% position before the Epson Stylus NX625 printer’s Waste Ink Pad is full of waste ink and the Waste Ink Counter raises up.
You can see on our website the software to reset the Waste Ink Counter come back to 0%, this is called WIC RESET TOOL. You can reset your printer’s Waste Ink Counter on your own by the detailed guide then your printer can print well.
If you are using the new Epson printer, you can’t be worried because the Waste Ink Counter can’t overflow but for the old one, if you don’t clean the Waste Ink Tray after the first resetting process, your printer can be damage because of the overflowing waste ink. The waste ink can also overflow out of the Epson Stylus NX625 printer anh make your table dirty.
You have to collect the waste ink out of the Waste Ink Pad after resetting Waste Ink Counter but you need to hajve the good skills and careful when open the Epson Stylus NX625 printer.
To solve all the problems, you should use WIC RESET TOOL regularly, you won’t need to collect and clean up the waste ink and your Waste Ink Pad is not able to overflow waste ink.
Avoid Waste Ink Counters and Waste ink Pad Overflow.
You should understand and find information clearly to know more about this problem and it’s necessary to find out some working principles of the Epson Printers.
What is Epson Stylus NX625 waste ink counter overflow and how to avoid?
1. What is Epson Stylus NX625 waste ink counter overflow?
Epson inkjet printers have inside a part of sponge for absorbing and collecting waste inks. It is called waste ink pad.
Waste Ink Pads are several porous pads in the inkjet printer that collect, distribute, and also really importantly contain the ink that is not used on printed pages (Waste Ink).
Waste Ink is collected by these pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs.
When printhead cleanup process ink flush through printhead to waste ink pad. Therefore single time it could be overflowed because it could not absorb ink anymore then the ink are going to leak from the bottom of the inkjet printer.
The inkjet printer counts how much ink flow to waste ink pad and also holds this number into printer’s memory ==> This number is called Waste Ink Counter.
+ To avoid ink leaking outside the Epson Stylus NX625 inkjet printer the waste ink counter may be overflowed and Epson Stylus NX625 printer will stop.
+ Full counter is 100%. Waste ink counters overflow means that counters values are more than 100%.
To make Epson Stylus NX625 printer printing again – You need to RESET the Epson Stylus NX625 printer Waste Ink Counter (Read more to learn how to reset epson printer).
2. How to know that your Epson Stylus NX625 printer waste ink counter overflow?
+ Your printer red light blinking
+ Your printer LCD screen or computer screen appear: “The Printer’s Ink Pads are at the end of Their service life. Please contact Epson Support” or “The Printer’s Ink Pad is at the end of Its service life. Please contact Epson Support”.
+ It is very easy to check Epson waste ink counters with WIC Reset Utility.
Step 1. Download WIC Reset Utility Tool here: Download WIC Reset
Step 2. Run WIC Reset Utility, Click on READ WASTE COUNTERS button:
Step 3. Read the result. If one or two counters are more than 100% (overflowed) – Epson Stylus NX625 printer can not printing – you need to RESET WASTE INK COUNTERS number
3. How to fix Epson Stylus NX625 waste ink counter overflow?
Step 1: Download WIC Reset Tool and install the application
Step 2: Buy the WIC RESET KEY
Step 3: Reset your printer with WIC Reset and WIC Reset Key
+ Connect your Epson Stylus NX625 printer to computer that you installed WIC reset utility. Connect computer to Internet.
+ Follow this article and reset Epson Stylus NX625 – Read how to reset Epson Stylus NX625 printer
=> Tips how to avoid Epson Stylus NX625 printer Waste Ink Counters overflow: Read here
How to avoid Epson Stylus NX625 printer Waste Ink Pad overflow?
When you apply all the detail hack Epson Stylus NX625 printer’s waste ink pad. We provide you about the problem called Waste Ink Counter bellow, You can find different location of the Waste Ink Pad in different Epson printer series.
Before starting with the detail steps we need to find some information about the ideas: As we know that the waste ink of the printer is constructed to flow into a wire pine to the Waste Ink Pad then they are collected by the sponge in the Waste Ink Pad, this make the waste ink not to overflow out of the Epson Stylus NX625 printer but the sponge has the limited absorbing ability so when the sponge is not able to absorb the waste ink, it’ll overflow.
There are many solutions for you such as replacing the Waste ink Pad or using something to suck all the waste ink, you can also follow the waste ink to a bottle that can contain the waste ink during the printing procedure. You can set your mind at rest that your Epson Stylus NX625 printer will not overflow the ink, everything you need is bring the bottle to pour then clean it.
Follow these steps to know more and apply them:
Step 1: Checking and open the cover of Epson Stylus NX625 printer’s waste ink pad:
Let’s see the cover by turn the printer, as you can see in the picture the small cover, this is the waste ink pad’s cover.
Open it and you can see the waste ink’s wire pine and the waste ink’s sponge in the picture below.
Then you can realize that the Epson Stylus NX625 printer’s waste ink pad is larger than the gate to go over the waste ink pad you have already opened when you see. Disassembling the shell and this way needs to be done carefully, you have to take your printer to a service center.
You can follow and apply our method that doesn’t need to remove any thing, let’s see in the second step:
Step 2: Separate the waste ink tube out of the Waste Ink Pad:
When you find the Waste Ink Pad of the Epson Stylus NX625 printer and the waste ink tube, you can use a tool to separate the waste ink tube iut of the waste ink pad. Please move everything softly and carefully to prevent the damage of the tube.
Be gentle and careful to avoid folding or cracking waste ink pipes of Epson Stylus NX625 printer.
Step 3: Tidy the waste ink tube and absorb the waste ink out of the Waste Ink counter, you can use a cylinder to suck the waste ink that is the remnant in the tube of the Epson printer.
You need to absorb the waste ink from the sponge in the Waste Ink Pad, if your Epson Stylus NX625 printer is new you can skip this step but if it’s old one, you have to clean the Waste Ink Pad to avoid overflowing waste ink when you move the printer. The waste ink can flow to othe oponents and make them dirty or broken down.
By this way, don’t worry about the waste ink overflowing when you don’t use the bottle to contain the waste ink. However, you have to check and suck the waste ink regularly so I think you should use a bottle to collect the waste ink.
Step 4: Install the bottle out of the printer.
You need to prepare the following:
– A bottle made from plastic or glass.
– A relative tube is as equal as the tube of the printer.
– The connection tool.
Let’s put the tube into the tube of the Epson Stylus NX625 printer then plug the other into the bottle we have mentioned, don’t forget to put the bottle is lower than your Epson Stylus NX625 printer to sure that the waste ink can flow easily as the picture below.
Now you can try printing some files and check the waste ink flow into the bottle or not.
After the bottle is full of waste ink you can bring it to clean then go on using.
Notes: This bottle is a long-term solution, if you want to use this convenient method I think you should reset the Waste Ink Counter by using WIC RESET TOOL (Download here). It’s extremely professional.
Thank you for your reading article “How to avoid Epson Stylus NX625 waste ink pad overflow”.