You are using the Epson Artisan 810 printer series and you have the issue with the Waste Ink, Epson Artisan 810 printer uses the Waste Ink Counter to prevent the waste ink from overflowing, the Waste Ink Counter will be full of ink after you print a large of documents, this limit raise up from 0% to 100%, when the Waste Ink Counter is equally 100% or more, the printer will stop working instantly to sure that the waste ink isn’t able to overflow into the Waste Ink Pad. The signals for this position are the twice red light flashing and send the notification “The Printer’s Ink Pads are at the end of Their service life. Please contact Epson Support”.
In case the printer is new, the Waste Ink Counter will be installed to reach 100% before both the waste ink tray and the waste ink counter raise up.
You can see on our website, we provide the WIC RESET TOOL software so you can solve this error by yourself when the Waste Ink Counter come back to 0%, the printer will go on working.
If you are using the new Epson printer, you can’t be worried because the Waste Ink Counter can’t overflow but for the old one, if you don’t clean the Waste Ink Pad after the first resetting process, your Epson printer can be damage because of the overflowing waste ink. The waste ink can also overflow out of the printer anh make your table dirty.
You have to collect the waste ink out of the Waste Ink Pad after resetting Waste Ink Counter but you need to hajve the good skills and careful when open the printer.
WIC RESET TOOL is suitable solution for you without collecting the waste ink in Waste Ink Pad.
How to void waste ink counters and waste ink pad overflow.
To find the methods avoid the overflowing of the Waste ink Pad in Epson, we need to find some principles of Waste Ink Counters on the Epson printer.
What is waste ink counters? Waste ink counter overflows?
1. What is Epson Artisan 810 waste ink counter overflow?
Epson inkjet printers have inside a part of sponge for absorbing and collecting waste inks. It is called waste ink pad.
Waste Ink Pads are a number of porous pads in the printer that collect, distribute, and very importantly contain the ink that is not used on printed pages (Waste Ink).
Waste Ink is collected by these pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs.
When printhead clearing process ink flush by printhead to waste ink pad. So that once it can be overflowed because it cannot absorb ink anymore in that case the ink are going to leak from the bottom of the printer.
The printer counts how many ink flow to waste ink pad and also stores this number into printer’s memory ==> This number is named Waste Ink Counter.
+ And to prevent ink leaking outside the Epson Artisan 810 printer the waste ink counter can be overflowed and Epson Artisan 810 inkjet printer is going to stop.
+ Full counter is 100%. Waste ink counters overflow means that counters values are more than 100%.
To get Epson Artisan 810 printer printing again – You have to RESET the Epson Artisan 810 printer Waste Ink Counter (Read more to learn how to reset epson printer).
2. How to know that your Epson Artisan 810 printer waste ink counter overflow?
+ Your Epson Artisan 810 printer red light blinking
+ Your printer LCD screen or computer screen appear: “The Printer’s Ink Pads are at the end of Their service life. Please contact Epson Support” or “The Printer’s Ink Pad is at the end of Its service life. Please contact Epson Support”.
+ It is very easy to check Epson waste ink counters with WIC Reset Utility.
Step 1. Download WIC Reset Tool here: Download WIC Reset
Step 2. Run WIC Reset Utility, Click on READ WASTE COUNTERS button:
Step 3. Read the message. If one or two counters are more than 100% (overflowed) – you can not print – you need to RESET WASTE INK COUNTERS number
3. How to fix Epson Artisan 810 waste ink counter overflow?
Step 1: Download WIC Reset Tool and install the application
Step 2: Buy the WIC RESET KEY
Step 3: Reset your printer with WIC Reset and WIC Reset Key
+ Connect your Epson Artisan 810 printer to computer that you installed WIC reset tool. Connect computer to Internet.
+ Follow this instruction and reset your printer – Read how to reset Epson Artisan 810 printer
=> Tips how to avoid Epson Artisan 810 printer Waste Ink Counters overflow: Read here
How to avoid Epson Artisan 810 printer Waste Ink Pad overflow?
You completely use these skills to sop the Epson Artisan 810 printer from meeting the problem called Waste Ink Counter Overflow after implementing resetting process. Each Epson printer is designed to have different Waste Ink Pad’s position so let’s read this text carefully to know more.
Before starting with the detail steps we need to find some information about the ideas: As we know that the waste ink of the printer is constructed to flow into a wire pine to the Waste Ink Pad then they are collected by the sponge in the Waste Ink Pad, this make the waste ink not to overflow out of the Epson Artisan 810 printer but the sponge has the limited absorbing ability so when the sponge is not able to absorb the waste ink, it’ll overflow.
I think that replacing the Epson Artisan 810 printer’s Waste ink Pad or using something to suck all the waste ink are two methods you bring up first but we have an alternative solution for you that is using waste ink bottle that can contain the waste ink during the printing procedure. Set your mind at rest because your Epson Artisan 810 printer will not overflow the ink, everything you need is bringing the bottle to pour then clean it.
Shall you follow these steps to know more:
Step 1: Checking and open the cover of Epson Artisan 810 printer’s waste ink pad:
Let’s see the cover by turn the printer, as you can see in the picture the small cover, this is the waste ink pad’s cover.
Open it and you can see the waste ink’s wire pine and the waste ink’s sponge in the picture below.
When you see the waste ink pad of the Epson Artisan 810 you need to disassemble the shell but the cover is smaller than the waste ink pad so you have to be careful when do this, I think the best thing is the fixer’s help.
Let’s see the step 2 because you can’t always open the Epson Artisan 810 printer to clean the waste ink pad or replace it.
Step 2: How to separate the tube from the Epson Artisan 810 printer’s Waste Ink Pad.
You can see the Waste Ink Pad of the Epson printer and the tube, you had better use the tool to separate the tube afrom the waste ink pad. Please clean it carefully to avoid the broken-down.
Be gentle and careful to avoid folding or cracking waste ink pipes of Epson Artisan 810 printer.
Step 3: Clean the tube and absorb all the waste ink from the waste ink pad, you can use a cylinder to suck the waste ink in the waste ink tube of the Epson printer.
You have to absorb the waste ink from the sponge in the Waste Ink Pad, if your Epson Artisan 810 printer is new you can skip this step but if it’s old one, you need to clean the Waste Ink Pad to avoid overflowing waste ink when you move the printer. The waste ink can flow to othe oponents and make them dirty or broken down.
By this way, don’t worry about the waste ink overflowing when you don’t use the bottle to contain the waste ink. However, you need to check and suck the waste ink regularly so I think you should use a bottle to collect the waste ink.
Step 4: Install the waste ink Bottle:
– You must the glass or plastic bottle.
– A tube is the same size as the the tube of the Epson printer.
– The connectors.
You can see in this picture to know how to install and assemblr all the component together to avoid the Epson Artisan 810 printer’s waste ink pad overflow.
Now you can try printing some files and check the waste ink flow into the bottle or not.
After a definite period of using you have to pour all the waste ink and clean the bottle up then continuprinting jobs.
Notes: This bottle is a good solution, if you want to use this convenient method for the long-team. I think you should use WIC Reset Tool for reset the Epson Artisan 810 printer’s Waste Ink Counter. It’s more professional than replace the Waste ink Pad.
Thanks for your reading post “How to avoid Epson Artisan 810 waste ink pad overflow”.