Canon G3300 error code 5B00 mean the waste ink counter overflow, you should be reset Canon G3300 Waste Ink Counter (clear Waste Counters). The printer will blink as follow: Orange light – 7 times. Alternatively Green (Power) and Orange.
And operating system show error “SupportCode: 5B00” like this:
This problem means Canon G3300 printer Waste Ink Counter is overflowed and it must be reset
As increasingly more ink spills take place on your Canon G3300 printer’s ink cartridges, because of proper ink cartridge or continuous ink system installation, the 5B00 error message could be more likely to appear on your own Canon G3300 printer.
Solution for this problem is reset Canon G3300 printer by WIC Reset Utility tool.
New WIC Reset Utility supports Canon G3300 printer now. Please always use latest WIC Version!!
Download WIC Reset Utility – Download Canon G3300 resetter
Download the LATEST version of the WIC reset utility here:
For Windows OS – http://resetkey.net/tools/wicreset.zip
For MAC OS – http://resetkey.net/tools/iWIC.zip
Mirro link here: http://resetkey.net/download
To reset Canon G3300 5B00 Waste Ink Counter Error – You need to PUT CANON PRINTER IN SERVICE MODE!
Then use WIC Reset Utility Tool with the Reset Key to reset your Canon G3300 printer. It takes less then 1 minute!
Start reading previous to reset Canon G3300 5B00 problem:
If for some reason You can’t put Your Canon G3300 printer in SERVICE MODE – You will be NOT ABLE to perform RESET!
If You used Canon Service Tool such as ST V3400, V4200 etc… – The printer will never be able to enter Service Mode after that.
So the only option to fix the problem is to change and also reprogram EEPROM Chip on printers main board.
If You cant put printer in Service Mode – You dont have to pay for Reset Key – it will not work.
How to put Canon G3300 printer in service mode
Step 1: Turn off Canon G3300 printer
Step 2: Press and hold Canon G3300 printer’s RESET button
Step 3: Press and hold printer’s POWER button.
Step 4: Released printer’s RESET button, POWER still pressed
Step 5: Press and released Canon G3300 printer’s RESET button 5 times
Step 6: Released printer’s POWER button:
Now, Canon G3300 printer on SERVICE MODE condition. In this condition, computer detect found new hardware.
Step 7: When OS detect FOUND NEW HARDWARE, wait about 20 seconds and press CANCEL
How exactly to reset Canon G3300 printer 5B00 Waste materials Ink Counter error
After put Your Canon G3300 printer in SERVICE MODE, please follow this instruction to reset Canon G3300 printer.
Step 1: Download latest WIC Reset Utility tool with above link (or here).
Step 2: Buy Canon G3300 Waste Ink Counter Reset Key here: Buy WIC Reset Key – Only $8.99
Step 3: Run WIC Reset, click on “Clear Waste Counters” button, read the check list, if all good, click “Yes” to continue reset Canon G3300 Waste Counter:
Step 4: Enter the Canon G3300 reset key
You will receive a “Congratulations” message if everything ok.
Now check Canon G3300 printer status in Control Panel, If it shows “Printer is online“, your Canon G3300 printer is ready to print – no errors – no waste Counters Overflow.
You should watch video tutorial – How to PUT PRINTER IN SERVICE MODE and Reset Canon G3300 printer 5B00 problem:
I hope this guide useful. Thank you